For double screw pump, it is very important to improve the efficiency of industrial operation. Specific improvements can be made from the use of equipment. The following is the use technique of the double screw pump summarized by the senior engineer in the industry, and I hope to give you some help in the work.
Before using the double screw, it is necessary to pay attention to whether the switch of the air nut and oil collecting block is open. It's time to plug in. Note that two quick connectors and quick connectors should be configured. Check that the parts are properly configured to turn on the power switch. At this time, the equipment starts to work normally, and the switch can be adjusted to the pressurized state in about 2 minutes, and the screw pump oil can be rotated normally. When the equipment is rotating, need to be supervised by a special person, don't be careless.
In particular, it is necessary to properly maintain the components of the twin screw pump properly after the work is completed. This is an essential step. We need our operators to operate with a patient quality. Slowly wait for the screw oil to return to the end of the oil, carefully remove the quick coupling sleeve and release the air nut. Handle both the power and the switch.
The use of double screw pump seems simple, but it is a patient and meticulous technical work. Mastering the working technique of double screw pump and the maintenance technology of double screw pump can effectively improve work efficiency and create more output value. In the long term, it can save the cost of equipment maintenance and realize energy-saving and efficient development.