GR-SMT16B pump is a three-screw pump for industrial use, suitable for use under low medium pressure (40 bar). SMT16B pump is a reliable low noise equipment. Suitable for long service life and low cost applications. SMT16B pump is a filling pump assembled in pump body. Pump body and screw are designed to avoid any axial load. The functional pressure forms tolerance between the balance piston of the main screw and the surrounding pump body. This creates balanced hydrodynamic power on the screw, as well as lubricating and cooling the seal assembly. The extracted fluid hydraulically transfers the torque required to move the side screw. Which means the snail The rod does not wear out during rotation. By adopting high-quality screw manufacturing process, the noise and pulsation are minimized. According to the geometric design, the sealing cavity is formed between the three screws. During screw rotation, the main screw forms a certain type of cavity that accommodates the flow of water and axially discharges it from the inlet to the outlet port. The SMT pump can be fitted with built-in or external pressure relief valves. The SMT16B screw is shorter than the SMT pump. Suitable for applications with limited space.
SMT16B three-screw pump 1.0Mpa full series model: